The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Le Mans 1 Le Mans 2 Le Mans 3 Engines

Sort by Title

Sort by Price

Page 16 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Gudgeon Pin

ENA13260 Fits G5, Convert, Cali 2, Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, S3, T3, T4, T5, 850 GT

Dimensions:
15mm ID x 22mm OD x 60mm

Gudgeon Pin

Superceded by ENA28260, aways replace as a pair if fitting in place of this earlier pin 13061260 as later type is heavier

Sorry this part is no longer available Sorry, this part is no longer available.

13061260 GU13061260 13 06 12 60
1306 1260 1306.1260 13.06.12.60

this part is no longer available
Sorry this item is out of production

Sump Extension

ENA14003 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), Daytona, 1100 Sport Carb

Deep sump spacer made from alloy. This increases the volume of air in the crankcase and helps reduce 'heavy breathing'. The oil is also better cooled when using one of these. Finished externally in silver paint

To fit this sump spacer you will need longer sump bolts (14 x SSA06055 + 4 x SSA06090) and a pair of sump gaskets (ENA14036). You will also need a longer dipstick, see ENA28005

variable availability Availability varies on this part, check availability

14003240 GU14003240 14 00 32 40
1400 3240 1400.3240 14.00.32.40

£128.00

INC VAT

£106.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Spring Washer

ENA14400 Fits 850/1000 ALL Models, V11 Sport, Cali 1100, Stelvio, 1100 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, 1200 Sport, Griso ALL, Quota 1100, Norge ALL

Dimensions:
19mm ID x 34mm OD x 1.5mm

Large spring washer

Used behind camshaft nut

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14433400 GU14433400 14 43 34 00
1443 3400 1443.3400 14.43.34.00

£1.70

INC VAT

£1.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Piston Ring Set

ENA14650 Fits Le Mans 1, Le Mans 2 (to engine no. 80389)

Dimensions:
For 83mm bores

Piston ring set for cast iron 83mm bores

These must not be used with Nikasil bores

Sorry this part is no longer available Sorry, this part is no longer available.

14060650-z 14060650 GU14060650 14 06 06 50
1406 0650 1406.0650 14.06.06.50

this part is no longer available
Sorry this item is out of production

Crankcase Breather Box

ENA14700 Fits Le Mans 1, Le Mans 2, V7 Sport

Dimensions:
Box measures 110mm x 70mm x 85mm, crankcase spigots measure 8mm OD and 17mm OD respectively

Crankcase breather tank / box in black. Also suitable for round barrelled specials where the standard airbox has been replaced with aftermarket filters

3 pipe connections on underside (large, medium and small diameters), plus connection for rocker cover breather pipes. Connects to ENA14157, ENA17700 and ENA95136

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14155700-z 14155700 GU14155700 14 15 57 00
1415 5700 1415.5700 14.15.57.00

£61.75

INC VAT

£51.46 EX VAT this is the price you will pay if you are ordering from outside the UK

Tacho Drive Pinion

ENA14769 Fits V35 ALL, V50 ALL, V65 ALL, V75, Nevada 750 (1991-2001), Nevada 350, 850/1000 ALL Models, Cali 1100 (1994-1997)

Tacho drive pinion

This part is available by special order, request a quote

14769200 GU14769200 14 76 92 00
1476 9200 1476.9200 14.76.92.00

£37.50

INC VAT

£31.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Main Bearing Flange Front

ENA14900 Fits S3, 850/1000 ALL Models, 1100 Sport ALL, Cali 1100, Bellagio, Daytona, Cali EV, Breva 850, Breva 1100, Cali Jackal, Cali Stone, Griso 850, Griso 1100, V11 Sport, Centauro

Front main bearing flange

This part is available by special order, request a quote

14011900 GU14011900 14 01 19 00
1401 1900 1401.1900 14.01.19.00

£98.00

INC VAT

£81.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Dipstick Short Alloy Screw In Type

ENA17951 Fits 1000 SP, Le Mans 2, Convert, G5, Le Mans 1, S3, T3, T4, 850T (late models)

Dimensions:
77mm gasket surface to high mark

Short screw in polished alloy dipstick with O ring for models without a sump extension. Can be used to replace long dipstick and tube on Le Mans 2 and 1000 SP

Will also fit V7 700, V7 Special and 850 GT if high and low levels are transposed from your old dipstick

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

17004951-z 17004951 GU17004951 17 00 49 51
1700 4951 1700.4951 17.00.49.51

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Head Gasket

ENA18026 Fits 1000 SP (90mm bore), G5 (90mm bore), Convert (90mm bore), Le Mans 1 (90mm bore), Le Mans 2 (90mm bore), T3 (90mm bore), T4 (90mm bore), 850T (90mm bore)

Dimensions:
90mm ID

Special head gasket

90mm bore for cylinders that have been taken out to 90mm, e.g. Raceco conversions

variable availability Availability varies on this part, check availability

£16.60

INC VAT

£13.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Alternator Cover Plastic

ENA18165 Fits 850/1000 ALL Models, Cali 1100, 1100 Sport, Quota 1100, V50, V50 II, V35 I

Dimensions:
210mm x 165mm x 50mm

Black plastic alternator cover with Moto Guzzi in white text

See ACA18650 for polished aluminium alternator covers

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

18001650-z 18001650 GU18001650 18 00 16 50
1800 1650 1800.1650 18.00.16.50

£34.00

INC VAT

£28.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 16 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23